What’s the Best Insulation for Your Attic?
If you have an attic, it’s probably suffered on more than one occasion due to the weather conditions. Rain, snow, hail, and wind are factors that can cause serious thermal and moisture problems. Therefore, you need to know the best insulation for your attic.
In this article, we suggest the main components you can use to protect your home. If you’ve had leak and moisture problems in your attic on more than one occasion, it’s time to take action.
As the weather is impossible to control, the only thing you can do is protect your home to avoid damage. It’s imperative to resort to the necessary means to make sure that the roof and walls always stay in good condition and, also, to avoid heat loss.
The attic is possibly the most important part of a house
Why do we say that the attic is one of the most important parts of a house? This area closes your home. It’s in close contact with the outside walls and ceiling.
Therefore, you need to use good quality materials. The main goal is to insulate the roof to prevent heat loss.
The first thing you’re going to get from quality insulation is savings. By using good materials, you protect the interior of your home. And this way, you don’t have to have the heating on at all times.
So, it’s best to invest in quality materials so that your house is well protected from the cold.
Procedure for the best insulation for your attic
If you’re going to insulate your home, you must be very clear about how to do it and try to protect the most sensitive part of your home – the roof. Good exterior waterproofing will help.
- First of all, you have to make sure you have the necessary materials and tools. You’ll need a drill, strong string, a tape measure, nails, vapor barrier sheeting, metal supports, and insulating materials.
- Place the metal supports on the beams and try to make it all symmetrically connected. Use the string to attach the supports.
- Then, place the insulating material between the beams and metal supports. These will serve to support the long horizontal rails to hold another layer of insulation.
How to position the vapor barrier
What’s this product for? It’s one of the most important insulation elements. Once you successfully finish the previous step, it’s time to cover them with this barrier to prevent moisture.
The role of this item is to regulate the exchange of water vapor. Likewise, it makes sure that the moisture can’t access your home easily and the heat doesn’t seep through any gaps.
When you’re positioning it, make sure to do it properly. A good quality tape can help you. Make sure that the tape itself is moisture resistant.
Just as your roof, the walls of the attic are always subjected to the weather and can also suffer from heat loss. This can affect your home. Therefore, you must keep the following aspects in mind when it comes to the walls:
- One of the best materials is fiberglass. It’s a very effective resource. Also, it performs the same function as vapor barriers. To put it in the walls, you have to follow the procedure you followed for the roof.
- Another solution is loose-fill cellulose. It’s stronger than fiberglass and usually used in colder places.
Nevertheless, both materials are suitable for insulation. What you need to keep in mind is that if you use two very thick layers, you’ll get much better results.
We hope you enjoyed this article on the best insulation for your attic.It might interest you...